Product

  • NS8808 DC12V digital LED Stripes replace WS2815/GS8208

    NS8808 DC12V digital LED stripes, it is same protocol with ws2815, the only one pixel LEDs can replace ws2815 directly at this moment, and it is more stable than ws2815 after long time tested.
    DC12V Dual-signal wires version, signal break-point continuous transmission. Any pixel’s failure won’t affect signal transfer and total emitting effect.

  • Pixel Digital SK6812 RGBW LED Strips

      SK6812 RGBW is a smart LED control circuit and light emitting circuit in one controlled LED source,which has the shape of a 5050 LED chip. Each lighting element is a pixel, and the intensities of the pixels are contained within the intelligent digital interface input. The output is driven by patented PWM technology, which effectively guarantees high consistency of the color of the pixels. The control circuit consists of a signal shaping amplification circuit, a built-in constant current circuit, and a high precision RC oscillator.

  • Programmable 72leds DC24V Pixel WS2811 UCS1903 RGB LED Strip lights

    IC Type:UCS1903
    Emitting Color:Digital RGB
    Working Input Voltage: DC24V
    LED Quantity: 72led/m
    Pixel quantity: 12pixels/m
    12mm width white/black pcb
    Download: UCS1903 IC Manual.PDF

  • RGB Pixel Addressable SK9822 LED Strips

      Individually addressable.SK9822IC built in SMD5050 LED. Same function as APA102C.APA102C and SK9822 are almost the same.
    Two-signal. DATA and CLOCK .More stable and faster. It is more stable than a single signal.High intensity and Reliability, Long lifespan .Higher technical content.Better lighting effect
    3M adhesive tape. Low carbon, no radiation, no flicker, and no pollution to human and environment. Safe and stable.
      But we suggest you use APA107 LED Strips to replace SK9822 LED Strips, they are almost same price, but APA107 with better quality and performance.

  • SK6812 3535 180LEDs/m LED Strip

    High density SK6812 3535 180LEDs/m LED Strip

  • SK6812 3535 Pixel LED Chip RGB addressable components

      Newstar can produce SK6812 3535 white and black face led chip, top quality with 3 years warranty, 4feet type (SK6812-3535-HS) and Flat type (SK6812-3535) can be choosed.
    Widely applicaiton, such as LED point light, LED pixel screen, LED shaped screen, a variety of electronic products, electrical equipment etc..

  • SK6812 3535 RGBW Pixel LED Chip 3535 rgbw addressable LEDs

    NC: NC (NC)
    GND: Ground (The signal and power supply and grounding)
    DIN: Data Input (control signal input data)
    VDD: Power (power supply pin)
    DOUT: Data Output (control signal output data)
    The chip supply voltage: DC5.2V
    The frequency of PWM: 1.2KHZ
    Static power consumption: 1mA

  • SK6812 RGB Pixel Digital LED Strip Lights

    LED Type: RGB 5050SMD chip with Built-in IC
    Waterproof: IP20 Non-waterproof, IP65 Silicon, IP67 silicon tube
    LED Quantity: 30/60/72/144leds per meter
    Pixel: 30/60/72/144 pcs per meter
    Working Input Voltage: 5VDC
    Drive Mode:Contant Voltage

  • SK6812 WS2812B Flexible LED Display

      Newstar’s SK6812/WS2812B Flexible led display, each LED is individually addressable, you can set each SK6812/WS2812B LED as you wish to scroll messages or draw little images.
    Newstar’s flexible led display is wide compatibility. It works great with Arduino, Raspberry Pi, FastLED library, Adafruit NeoPixel Library, Rainbowduino, SP103E, SP105E, K1000C,T1000S, etc.
    SK6812/WS2812B led display with chainable and bendable design. You can extend the panel by hooking them up one by one with the 3pin JST connectors. Flexible FPCB can be gently bent and curved around surfaces.
    It works almost the same as NeoPixel but much cheaper than NeoPixel. It is sturdy, beautiful and very comparable to other similar products.

  • SK9822-A 5050 RGB Pixel LED Chip upgrade of SK9822

      SK9822-A is the upgrade type of SK9822, PWM refresh rate can be 27kHz, Oscillator Frequency is more than 30MHz.
    SK9822-A RGB LED chip is same with SK9822 with a type ic for the three-color RGB Diming control strip and string ,This ic using the CMOS process to provide three-color RGB LED output driver to adjust the output with 256 gray scale and 32 brightness adjustment,SK9822-A RGB LED diodes with 2 signal output way, one is clock ,another is data, the clock and data is synchronizated ,so that the crystal cascade piece of output movement is sychronizated.

  • Smart Application APA107 RGB Digital LED Chip 5050 smd

    APA107 RGB LED chip is a type ic for the three-color RGB Diming control strip and string ,This ic using the CMOS process to provide three-color RGB LED output driver to adjust the output with 256 gray scale and 32 brightness adjustment,APA107 RGB LED diodes with 2 signal output way, one is clock ,another is data, the clock and data is synchronizated ,so that the crystal cascade piece of output movement is sychronizated.

    The APA107 upgrade type NS107S is available, the PWM can be 27kHz, faster and cheaper than APA102.

  • Smart NS107S 3535 RGB Pixel Addressable LED Chip

    NS107S 3535 Pixel LED Chip, the refresh frequency reaches to 27KHz