27Khz NS108 16bit 65536 5050 RGB Pixel LED Chip
NS108 LED is the upgrade type of NS107S, 16bit RGB Pixel LED Chip 5050
RGB three-color output control, 64Bit (65536 level) color settings.
each output channel can output 16 (65536 level) gray adjustable linear currentAddressable 3000k+4000k+6000k DC12V pixel 2835smd 180leds/m three white GS8208 LED tapes
GS8208 3000k+4000k+6000k three white led strip with a new GS8208 IC chip for the digital led lighting products,for it is individual pixel strip,also can support dc12v,which can be greatly installat in the different place
Addressable CCT Adjustable DMX512 Pixel LED Strips
Addressable CCT Adjustable DMX512 Pixel LED Strips
Addressable SK6812 White Pixel Digital LED Strips
SK6812 White is a smart LED control circuit and light emitting circuit in one controlled LED source,which has the shape of a 5050 LED chip. Each lighting element is a pixel, and the intensities of the pixels are contained within the intelligent digital interface input. The output is driven by patented PWM technology, which effectively guarantees high consistency of the color of the pixels. The control circuit consists of a signal shaping amplification circuit, a built-in constant current circuit, and a high precision RC oscillator.
Addressable WS2813 3535 Pixel Digital LED Strips
WS2813 Pixel Digital LED Strip Lights adopt WS2813 led chip with dual signal to be the light source,and the capacitance is package in the led chip, so you can see there are no capacitances on the PCB. WS2813 Pixel Digital LED Strip Lights is more stable than another pixel digital led strip lights, as one led is broken will not affect another LED Working.
APA102 White Pixel Digital LED Strips
We don’t suggest dotstar APA102 White LED Strip. If need economic type, you can use APA107, if need higher PWM than APA102, you can use NS107S.
APA107 3000K+6000K Mixed White Pixel LED Strips
APA107 3000K+6000K Mixed White Pixel LED Strips
DC12V DC24V DMX512 RGB Pixel Digital LED Strip Lights
Built-in RS485 decoder chip(A/B/GND), parallel signal transmission (one broken≠ all broken), original DMX address can be reset by address setter, compatible with DMX512/1990 protocol.
There are five wires:
DC+ and GND connect to power supplier;
A, B and GND connect to controller.DC24V Addressable 60leds 5wires DMX512 RGB LED Strips
-24V Addressable RGB Led Strip
-Individually Programmable Led Strip
-Address Can Be Written
-Break Point Continued
-Two Data Lines, Two Power Lines,12mm Wide White PCB, 256 Gray Grade, Can Getting any Effects With Address Programming By the DMX Controller.
-Big Advantage is: Special: *Address Can Be Writen *Break Point Continued.DC24V Addressable 60leds 5wires DMX512 RGBW LED tapelights
-24V Addressable RGBW Led tapelights
-Individually Programmable Led tapelights
-Address Can Be Written
-Break Point Continued
-Two Data Lines, Two Power Lines,12mm Wide White PCB, 256 Gray Grade, Can Getting any Effects With Address Programming By the DMX Controller.
-Big Advantage is: Special: *Address Can Be Writen *Break Point Continued.DC5V Data Backup Individually Addressable Pixel DI/BI WS2813 RGBW LED STRIP
Pixel Data Backup RGBW LED STRIP
DC5V
Individually Addressable
two date wireDigital DMX512 addressable RGBW LED Strips
Newstar’s DMX512 led strips adopt DMX512 protocol, can be controlled by DMX controller without any decoder.
Five cables, +5V(12v, 24V), PI address writing wire, A(DA+), B(DA-), GND.
Voltage: DC5V, DC12V, DC24V
© Copyright 2009-2020. All Rights Reserved.